Certified ADAS Calibration Services
ADAS calibration aligns and tests the cameras and sensors used by your vehicle’s Advanced Driver Assistance Systems. These systems may support lane departure warnings, forward collision alerts, automatic emergency braking, adaptive cruise control, and other features that monitor the road around your vehicle.
Nacco Glass provides mobile and in-shop ADAS calibration for personal vehicles, work vehicles, and commercial fleets. We can calibrate a vehicle after installing its new windshield or address a recent windshield replacement completed by another auto glass company or body shop. In-shop appointments are available in Mokena, IL, and St. John, IN, with mobile service offered throughout Northern Illinois, Northwest Indiana, and Southern Wisconsin.
When Does a Vehicle Need ADAS Calibration?
ADAS calibration is commonly required after replacing a windshield that supports a forward-facing camera. Removing the original glass and installing a new windshield can change the camera’s position or viewing angle even when the physical difference is difficult to see. Understanding why windshield calibration is necessary begins with recognizing how precisely these systems measure the road and the vehicle’s surroundings.
Calibration may also be required after collision repairs, camera or sensor replacement, suspension work, wheel alignment, or other service that affects the vehicle’s ride height or sensor positioning. Warning lights, error messages, or unusual driver-assistance behavior can also indicate that the system needs to be evaluated.
Click here to learn more about the importance of windshield calibration for ADAS-equipped vehicles.
Static & Dynamic ADAS Calibration
Static ADAS calibration uses targets, measurements, and specialized equipment while the vehicle remains stationary. Dynamic calibration uses diagnostic equipment while the vehicle is driven under manufacturer-specified road and speed conditions. Some vehicles require one method, while others require both.
The correct procedure depends on the vehicle’s year, make, model, trim, and installed safety equipment. Whether ADAS calibration can be done mobile or requires a shop also depends on the procedure and whether the service location provides the necessary space, surface, lighting, and road conditions. Nacco Glass identifies these requirements before calibration begins.
ADAS Features That Depend on Accurate Calibration
Common ADAS features include lane departure warnings, lane-keeping assistance, forward collision alerts, adaptive cruise control, automatic emergency braking, parking assistance, and other safety or convenience technology. These systems may use different combinations of cameras, radar, and sensors, so not every feature is affected by the windshield in the same way.
A windshield-mounted camera must have an accurate view of the road to interpret lane markings, vehicles, signs, and other surroundings as intended. Calibration restores the camera’s reference points so the affected systems can process that information from the position specified for the vehicle.
To learn more about the standard features of ADAS and how they improve driver safety and convenience, read our blog post.
Lane-Keep Assist & Windshield Camera Calibration
Windshield replacement affects lane-keep assist when removing and reinstalling the forward-facing camera changes its view of the road. Lane-keep assist uses that camera to monitor lane markings and provide information the vehicle may use to warn you about lane departure or make steering corrections.
The camera can require calibration even when the new windshield appears to fit correctly. Completing the manufacturer-specified procedure helps the system identify lane position using the intended reference points rather than relying on a camera that may be slightly misaligned.
Want to learn more about how windshield replacement impacts lane-keep assist? Click here to read our blog.
Mobile ADAS Calibration for Personal Vehicles & Fleets
Mobile ADAS calibration may be available at your home, workplace, fleet facility, or another suitable location. Dynamic procedures require appropriate roads, lane markings, traffic, weather, and driving conditions. Static procedures require enough level space to position the vehicle, targets, measuring equipment, and calibration frame according to the manufacturer’s specifications.
Nacco Glass evaluates the vehicle and service location before confirming mobile calibration. This can be especially valuable for commercial fleets because eligible windshield replacements and calibrations can be coordinated at the facility instead of requiring each vehicle to travel to a shop. Every vehicle still receives an individual assessment because two units within the same fleet may use different cameras or require different procedures.
If the on-site environment cannot support an accurate calibration, service can be completed at our Mokena or St. John shop. The goal is to choose the setting that meets the vehicle’s requirements rather than forcing every calibration into the same service model.
Schedule Mobile or In-Shop ADAS Calibration
Nacco Glass brings more than 30 years of family-owned auto glass experience to windshield calibration for personal and commercial vehicles. Our certified technicians can coordinate windshield replacement and ADAS calibration or calibrate a recently installed windshield when the original installer did not provide that service. Contact us with your vehicle information and service location to receive a free quote and determine whether mobile or in-shop calibration is the right option.
ADAS CALIBRATION FAQS
What is ADAS Calibration?
ADAS calibration refers to adjusting the cameras and sensors in vehicles equipped with Advanced Driver Assistance Systems so that safety features like lane departure alerts, adaptive cruise control, and automated braking work correctly.
Why Is ADAS Calibration Necessary After Windshield Replacement?
When a windshield is replaced—especially in vehicles with smart safety features—the position of cameras and sensors can change. Even the slightest misalignment can cause safety features to malfunction, putting you and other drivers at risk. To ensure these systems function as designed with the new glass, ADAS calibration is required after the replacement.
To learn more about the importance of ADAS calibration, click here.
Do You Offer ADAS Calibration at My Location?
Yes. Nacco Glass provides on-site ADAS calibration throughout Northern Illinois and Indiana, so you can have your windshield calibrated at home, work, or another convenient location.
Can I Bring My Vehicle to the Shop for ADAS Calibration?
Yes. Nacco Glass offers in-shop ADAS calibration in St. John, IN, and Mokena, IL, if you prefer to drive your vehicle to the facility for service.
Which Safety Systems Rely on Proper ADAS Calibration?
Many modern safety features depend on correct ADAS calibration to function properly after windshield replacement. These systems include lane departure warnings, adaptive cruise control, forward collision alerts, blind-spot monitoring, parking assistance, and rain-sensing wipers. Calibration helps ensure these features read the road accurately and respond as intended while driving.
Click here to learn more about ADAS safety features.
In What Other Situations Is ADAS Calibration Required?
ADAS calibration is not only recommended after windshield replacement, but also after any situation in which cameras or sensors may be misaligned. This can include body or collision repairs, wheel alignments, suspension work, camera or sensor replacement, or when ADAS warning lights or error messages appear on your dashboard.
